Junsi / iCharger DX8 Duo Charger 2x 1100W // 1x 1600W

Junsi/iCharger iCharger DX8

Latest Synchronous Buck-Boost Technology for maximum performance with small dimensions

DUO charger with 2 equivalent charging outputs, each with a maximum of 1100W / total 1600W

USB-C port with PD (Power Delivery) for charging current smartphones, etc. 5V/3A, 9V/2A, 12V/1.5A

Micro SD slot for data logging // Integrated servo tester (external power supply required!)

Total 4A balancer current (2A per output) Very compact and lightweight (LxWxH 97.5 x 128.5 x 40, weight 440g)

Description

With the new iCharger DX8, renowned manufacturer Junsi has launched a compact DUO charger.

The new DX8 charger combines the advantages of the well-known Junsi iCharger 308DUO with the portability of a small pocket charger. Despite its small dimensions of 97.5 x 128.5 x 40 mm, no compromises have been made in terms of performance and usability. The newly developed rotary wheel has a very good pressure point and makes operation much easier.

The technical data is impressive: 1600W charging power (from >25V), 1-8s LiXx cells and up to 30 amps charging current are sufficient even for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can also be charged.

The discharge power is 70 watts total (45W per output if only one output is used), but can be increased to up to 2100W by means of an external load (discharge resistor). Of course, the iCharger DX8 also supports regenerative charging. This means that the battery capacity of a fully charged flight battery, for example, is fed back into the supply battery.

The total balancer current of 4 amps (2A per output) always ensures perfectly balanced cell voltages.

A USB-C PD port for charging smartphones, etc. (5V/3A, 9V/2A, 12V/1.5A) or for software updates is also included. The micro SD slot can be used for logging data, but also for future updates.

A servo tester is also integrated; please note that an external power supply is required for this!

The menu navigation is almost identical to the familiar Junsi iCharger 308DUO, 406 DUO, or 4010DUO.

A 2.4" IPS LCD display ensures good readability even in low light conditions.

Instructions in English are included with the charger on a CD; the German version is available for download from our website.

All Junsi chargers in the X and DUO series are designed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies designed for model making! No AGM batteries may be charged in the PB program!

Scope of delivery: Only the device itself is supplied!

IMPORTANT! The appropriate voltage source must be set for all Junsi chargers, otherwise defects may occur that are NOT covered by the warranty!

Example: If your power supply delivers 600W and 24V, then this voltage and the maximum current must be set in the charger! (600W : 24V = 25A)

Features

Adjustable charging current per output: 0.05-30A

Adjustable charging current in synchronous mode: 0.05-50A

Max. number of NiCd/NiMH batteries: 1-25 cells

Max. number of LiPo cells: 1-8

Max. power: 1600W

Charging power max. synchronous: 1600W

External high-current discharge synchronous: 1600W

Max. voltage lead batteries: 2-30V

External high-current discharge asynchronous: 2100W (per channel 1050W at 35V/30A)

Balancer balancing current per output: 2A

Charging power max. at one output: 30A

Discharge power per output: 30A

Max. charging current: 30A asynchronous, 50A synchronous

Balancer equalization current synchronous mode: 4A

Discharge current adjustable with energy recovery: 50A

Input current limit: 65A

Max. discharge power in synchronous mode: 70W

Max. discharge power: 70W (45W per channel when used individually, max. 70W when both are used together!)

Max. number of LiHv cells: 8

Input voltage: 9-49V DC

Balancer accuracy (depending on setting): <10mV

Micro SD card slot: Yes

Length (mm): LxWxH 97.5 x 128.5 x 40 Weight 440g

Integrated power supply: No

Charging output connector type: XT60

Input connector type: XT90

Warning and safety instructions

WARNING: Not suitable for children under 14 years of age. Use under direct adult supervision.

Product safety

Manufacturer information:

Shenzhen New Junsi Electronic Co.,Ltd (JUNSI)

Room 208, Huaxuan Building Haibin Plaza, Ji , 518033 Futian, Shenzhen China

China (CN)

Email:

szjunsi@163.com

Responsible person:

SieBra GmbH & Co. KG

Christian-Liebrecht-Straße 6

58739 Wickede

Germany (DE)

Phone: 02307/146280

Web: www.rc-dome.de

Email:

info@rc-dome.de